2020 Profile V-Slot Aluminium Construction Extrusion

Product Description Want create site? Find Free WordPress Themes and plugins.2020 T-SLot Aluminium Construction Extrusion with V-Slot top edge profile Product attributes: 20mm x 20mm cross section 6mm T-slot all round Silver (plain/natural) Anodised Aluminium (6063-T5) Weight: ~0.58kg/m Please note the 90 angles indicated on each slot per the schematic below is approximate in reality may be closer to around 87-88 degrees according to my measurements the angle will still be consistent across each slot for the length of the extrusion supplied Product options -> Length selection: If you require lengths other than those available in the length selector above: For each length you require: order the next size up from what you require in the qty you require, e.g. if you require 2 x 240mm order 2 x 250mm add a note to your order on checkout saying for the pieces you ordered the length you actually require e.g. 2 x 240mm we will trim to your required sizes (no additional charge applies if you order per these instructions) Accuracy will be /- 0.5mm (although we strive to be better than this and usually are) For the sample scenario above, please don’t order 1 x 500mm and ask us to cut it into 2 x 240mm because we won’t Product options -> Machining options Cutting options default is standard square (90 degree) cuts (accuracy /- 0.33mm) for 45 degree cuts accuracy is /- 0.5mm End threading options M5/M6 Select 1 or both ends Used for adding screw-in feet and for butt jointing etc We tap an M5/M6 threads to a minimum depth of 20mm Mill & drill 11mm land for M5 or M6 Hex Cap screw M6: We mill an 11.5mm land to the bottom of the T-Slot (~6.1mm), we then drill a 6.35mm hole through the land and out the other side M5: We mill an 10.5mm land to the bottom of the T-Slot (~6.1mm), we then drill a 5.5mm hole through the land and out the other side Allows a strong butt jointing of an end threaded piece of 2020 / 2040 when using M5x30 / M6x30mm hex cap head screw If you select this option, you need to clearly tell us where you want the milling done (Note: Is always on the centerline, this service does not offer the option to offset from the centerline) Distance from an end Face if more than 1 milling/drilling operation selected and for which size cap screw M5 or M6 Combined with the M5/M6 threading option above, andM5x30mm / M6x30mm Cap head screws these options facilitate this type of  strong clean butt joints: Drill tool hole We drill a 5.5mm tool hole on the face you indicate Allows butt jointing an end theaded piece of 2020 / 2040 when using an M6x25mm button head screw Is always on the centerline, this service does not offer the option to offset from the centerline If you select this option, you need to clearly tell us where you want the milling done (Note: Is always on the centerline, this service does not offer the option to offset from the centerline) Distance from an end Face if more than 1 milling/drilling operation selected Combined with the M6 threading option above, and M6x25mm Button head bolts these options facilitate this type of hidden joints: Communicating -> Machining options We offer the machining options above at a very low cost to you.  This means we request you make an effort to communicate very clearly what you require to minimise any additional back and forth.  I suggest you draw a picture, maybe take a clear photo/s with you phone and email it in Here is an excellent example from a customer who ordered parts for an Eustathios 3D printer frame: The customer ordered: 4 x 600mm lengths with these options selected: End threading options M6 -> 1 End only Drill tool hole -> x 5 12 x 450mm lengths with these options selected: End threading options M6 -> 2 (Both) ends 1 x 350mm length with these options selected: End threading options M6 -> 2 (Both) ends 2 x 400mm lengths with these options selected: Drill tool hole -> x 1 And provided these drawings (click each drawing to enlarge) from which there was no ambiguity as to what was required: Did you find apk for android? You can find new Free Android Games and apps.